Edge of Dock Levelers

SEPPES Products

Edge of Dock Levelers

What are Edge of Dock Levelers

Edge of dock levelers are a type of loading platform used to fill the gap between the edge of the loading bay and the trucks and ramps. Unlike hydraulic dock levelers, edge of dock levelers are mounted directly on the platform edge and fixed to the edge of the platform. There is no need to reserve pit space on the platform.                                                                    An edge of dock leveler is a crucial component of modern loading dock systems, designed to enhance the efficiency and safety of the loading and unloading process. This equipment serves as a bridge between the loading dock and the trailer or truck, allowing for smooth and easy transfer of goods.

Seppes edge of dock levelers are ideal for logistics terminals where there is insufficient space for installation.

Why Choose Edges of Dock Leveler?

How to Use Edge of Dock Plate?

  • Once the lorry is parked in the loading area, undo the operating lever fixings and insert the operating lever into the platform.
  • Using the operating lever inwards, pull the platform downwards until the operating lever reaches the horizontal position, which is also the highest position of the dock leveler.
  • Slowly raise the lever upwards and the hitch opens automatically to the rear of the truck.
  • After confirming that the hitch is securely attached, remove the lever, return it to the lever mounting device, and the loading edge of the dock leveler is ready for use.

Get A Free Qoute

Edge of Dock Levelers

The Safest Dock Leveler Solutions

Contact Email

diana@seppes.com.cn

Telephone

(+86)17768032191

Please enable JavaScript in your browser to complete this form.

Installation Instructions

All measurements are made indoors and each value must be measured at at least three point:                                                                                                H – the height of the sectional door opening (the distance from the ground to the top of the door opening)                                                                                B – the width of the door opening (the distance from the left edge of the door opening to the right edge)                                                                        h – at least 500 mm above the door opening (the distance from the top of the door opening to the ceiling)                                                                        b1/b2 – requires a lateral distance of at least 150 mm left and right (distance from the corresponding edge of the door opening to the obstacle)                 L is the depth of the room

When measuring H and B, take the maximum value as the final size
When measuring h, b1, b2 and L, take the smallest value as the final size

Provision of Professional Technical Services

sectional overhead door

Determine the needs

After understanding the product, size, quantity, trade mode, use of these basic needs, the business promptly provide quotations and drawings to the customer to confirm.

sectional overhead door

Provide technical services

SEPPES professional technical team will be based on the sectional door information provided by the customer, customised technical solutions and drawings.

sectional overhead door

Factory production

After the customer agrees with the plan, the salesman will make PI, confirm the payment and notify the factory for production.

Welcome To SEPPES Professional Factory Manufacturing

We Have Authentic And Authoritative Certificates

All Loading Dock Products Have More Than 20 International Certificates

CE certification
loading dock leveler
certification
Certification

Fully Satisfied And Happy Customers

These two customers are from Columbia and the purpose of their visit was to purchase SEPPES spiral doors. It was raining heavily on the day they came, our sales staff Nova and Loy went to meet them and led them to visit our factory, explaining to them in detail the parameters of the doors and the use of scenarios. Our leader Mia Yang also had a cordial communication with the two customers. They did not confirm the order at the first time, but after a period of time, the other party took the initiative to contact us to confirm the order. The transaction process was very smooth.
Clients From Colombia
Operations Lead
SEPPES sectional overhead doors are professionally designed to meet our needs well. Both sealing performance and durability have been excellent. In actual use, we found it very convenient to operate, which greatly improved the working efficiency. SEPPES' customer service is also impressive. From product enquiry to after-sales service, they have given timely and professional support in every aspect. Zhang has been very patient in identifying the parts that need to be customised. No matter what problems we encountered, they were always able to respond quickly and provide effective solutions, which made us feel very relieved.
sectional overhead door
Clients From Russia
Logistics Manager
The co-operating customer is a local logistics company from Australia, who came to Suzhou, China to visit SEPPES Door Co. After introducing the loading dock leveler, he was very sure about our professionalism. After comparing a number of brands, he finally chose SEPPES brand. Our sales staff gave a quotation that met their expectations, and the contract was soon confirmed by both parties. In the first cooperation, the customer trusted us very much, and used 100% prepayment, the two sides had a very pleasant cooperation, and the customer also said that they would cooperate with us again in the future.
sectional overhead door
Clients From Australia
Warehouse Supervisor
The client is the head of a food cold chain logistics company from the Philippines. Due to the expansion of the logistics loading area, a large number of sectional doors, door seals and dock leveler were required. So they found our brand and our sales person Jee was responsible for docking. It is understood that the customer also looked for many other loading dock product counterparts, and there are many prices lower than ours. But he thought that the quality of our products is very good, and after-sales service is also very reliable. He finally chose the SEPPES brand and he expressed his full affirmation of our products.
sectional overhead door
Clients From Pakistan
Operations Manager

Our Amazing Clients

SEPPES has cooperation customers with more than 60 Fortune 500 companies such as Pepsi, Logitech, Huawei, and Procter & Gamble.

Request an Instant Quote for Your Project!

Other Loading Dock Equipment You May Like

You May Like Loading Dock Equipment For Logisict Warehouse

Why Choose SEPPES Dock Leveler

We have the most professional manufacturing loading dock equipment and talents in the field of industrial equipments. Let’s look at the whole process of manufacturing and shipping:

20000㎡factory area

Our factory covers an area of 17,500 square meters, which can meet the needs of large orders, fast production and delivery.

Safety protection

Standard safety solenoid valve to prevent falling. You can also choose a limiter to prevent the car from rolling.

Professional staff

SEPPES employees are all professionally trained, and they all have more than ten years of production experience.

Intelligent control

The intelligent loading and unloading platform control system can realize man-machine dialogue operation and maintenance.

Packing area

Products will be tightly packed and put into wooden boxes. to ensure that it will not be damaged during transportation.

Safe shipping

After the door is packaged, our own special vehicle will be responsible for safely transporting the product to the port for shipping.

Frequently Asked Questions About Warehouse Edge of Dock Leveler

The hydraulic edge of dock leveler has beautiful appearance, ruggedness, stable switching, low noise, sealed insulation, safety and reliability, and the characteristics of saving plant space. It is widely used for its high practicality and high-end appearance.

Regular maintenance is crucial to ensure optimal performance and longevity. Key maintenance practices include:
1. Inspecting hydraulic systems for leaks and proper fluid levels.
2. Cleaning the platform and components to prevent debris buildup.
3. Checking for any signs of wear or damage and addressing them promptly.
4. Lubricating moving parts according to the manufacturer’s recommendations.

Product design drawings, English installation video to ensure that the product purchased by the customer can be installed

Our Seppes edge of dock levelers have passed CE certification, ISO9001 and SGS certification, and we will carefully check the products before leaving the factory to protect the rights and interests of customers.

Loading port: Shanghai port or according to your requirements.General around 15-20 days after sample confirmed.

未标题-211031 (1)

Request a Quote

Address

No. 5001 Baodai West Road, Mudu Town, Wuzhong District, Suzhou City, Jiangsu Province, China

Email

diana@seppes.com.cn

Phone

(+86)17768032191

Please enable JavaScript in your browser to complete this form.